The same profiles as that of M3 system are used in this system. The main principal is that aluminum in the structural cassettes is not visible from the outside, thus creating an effect of a glass wall. The system has the following peculiarities:

External appearance of the system and its technical capacities are analogues with МЗ Solar Semi Structural or МЗ Solar Structural systems.
 The system has the following peculiarities:

M50 Solar Standard Plus — М50 system is designed to make light, hinged wall screens of building as well as for sloping transparent constructions with  angle slope up to 10i. Vertical /columns/ and horizontal /girders/ elements with visible 50mm width are included in the supporting construction. The assembling of columns and girders is done by means of “girder-girder’’ system that is butt-to-butt without milling the girder and column slots. This approach enables to use identical profiles for making columns and girders, thus economizing materials on the account of waste quality reduction. Drainage reliability is provided by a special polyamide strip on the girder of the system.

Depending on the facility construction and loading that influences upon the enclosed constructions, the designer has an opportunity to choose necessary supporting elements, therefore a range of column sets with moment inertia Iх from 20,8 to 433 4 sм are envisaged in the M50 series. In case of extra loadings, all the columns can be reinforced by special columns, profiles inset in the constructions.

Removal of moisture and ventilation in the region of the double-glass pane rabbet is provided in the M50 series. System resolutions give an opportunity to make facades with double level condensation drainage. There is a set of assembling columns in the series which provide the mounting of enclosed construction of the building with the help of pre-assembled elements. Any type of opening windows and doors can be installed in the facade construction.

Incorporation into the facade is done by means of a special adapter. A special polyamide strip on the girder and a 'HI' supplementary thermo inset provide high indexes of warmth and sound insulation.

Exploitation characteristics:

• Filling thickness - 4 - 42 мм. .
• Thermal Transfer Resistance
• Without using HI thermal inset — 0,6 (м2 х К)/Vt.
• Using HI thermal inset HI — 0,97 (м2 х К)/Vt.
• Sound insulation— 49 dB.
• Set of frame materials— 1.0

M6 Solar Standard Alutherm — Is a classical post- girder facade system with 55mm width exterior caps. This system can be used for making winter gardens, zenithal skylights, cupolas, atriums and other composite architectural formworks. 24 mm width polyamide thermal bridge provides the system’s thermal insulation according to GROUP 2.1 (DIN 4108) category. Big sized posts and girders of the system enable to design facades with major layouts.
Combining of compactors, glazing beads and thermal bridge expanders give an opportunity to install from 24 to 50mm width filling elements in the facade. Special type of opening windows is designed in M6 system. These are the so called 'latent' windows the frame and flap of which is not visible from the outside. Girder attachment point to the post provides a simple technology of facade assemblage compared with other analogous post-girder systems.

The system is certified by IFT Rosenheim German Institute and ranks a high category after the test validation (wind load, airtightness, watertightness, mechanical loading, and thermal insulation).